braindead1684
Member
I feel better as mine is in pieces as well. Total Suspension rebuild underway, suspension and track are out but waiting for all bushing, bearings and for the shocks to be rebuilt,
new 1" Camoplast Track ZERO studs this time,
New hi-fax's to come and carbides ready for the first trip up.
Can't ride until december usualy too busy during deer season coming up.
new 1" Camoplast Track ZERO studs this time,
New hi-fax's to come and carbides ready for the first trip up.
Can't ride until december usualy too busy during deer season coming up.
cos in alaska
New member
Allready riding here too.
Ike
Ike
I dont like you 2! just messing....
smokin george
New member
I"m almost ready! Waiting to get the new track,shocks,bearings,bushings,sliders,clutch set up or rebuilt,carbs cleaned and whatever the million dollar sled needs. Once I pick it up I"ll throw on my new black windshield and install a Xenon bulb in the headlight.
grooter
New member
Almost!!
WAITING FOR THE MEMBERSHIP TO COME BACK SO I CAN REGISTER THE BEAST DEALER JUST CALLED AND THE SLEDS READY TO BE PICKED UP, NEW TRACKS IN AND DEBATING ON WEATHER TO PUT A CLUTCH KIT IN?? THE YARD MAY CATCH
WAITING FOR THE MEMBERSHIP TO COME BACK SO I CAN REGISTER THE BEAST DEALER JUST CALLED AND THE SLEDS READY TO BE PICKED UP, NEW TRACKS IN AND DEBATING ON WEATHER TO PUT A CLUTCH KIT IN?? THE YARD MAY CATCH
SRX7
New member
Mine is ready. But Im wayyyyy down south.
maxout01
VIP Member
cos in alaska said:The Viper still has the cover over it but I put 150 miles on the old Mmax last weekend!
I am very upset with you.., lol!!!
maxout01
VIP Member
sled is still on blocks. No seat. Battery is out. No ski's or carbides. And it needs to be registered. Plus I have yet to renew my club memebership, lol!! Oh well it was 60 out here today anyway...
srxbully
New member
ready for what?? we didnt get snow until; the middle of febuary last season.
Skidooslayer687
Member
lol mines nowhere near ready yet, i did get the track installed with the suspension this past weekend... gotta put my engine back together and then put it back in the sled... after thats done then hood and seat back on, and then just clutching and jetting... lol a lot to do, but i got the time, i dont expect snow yet for awhile, although i definately wish it was here. I cant wait to see what a difference all of this years mods have done
amatosrx
VIP Life Member
not ready yet . i sent out my seat to get a custom stitch job done to it. it is going to have black top and blue, white and chrome vinyl on the side with the yamaha tuning forks emblem on the flap it is going to finish off the look of my srx. i am putting a custom clear led tail light in the seat. i am just starting to clean my sled up for the season. it is not going to snow good any time soon. i have to polish up all of the stuff on my sled.
Attachments
nben
VIP Member
Not ready!
woolyviper
New member
Not ready - clutches still off the viper - need cleaning and the secondary needs buttons (on order). the nytro still needs the crap upper wheels replaced on warranty and I need to wire a new tail light for the boss seat - the phazer (still at the dealer) has to have the steering recall done and the new track (free ride) installed and once I get it home put the new C & A's on it - I should be riding by March.
woolyviper
New member
dude!nben said:Not ready!
Maim
Super Moderator
haven't torn my sled apart yet for the mods for this season. so atm it is at add gas and go.
Blkhwkbob
VIP Member
nben said:Not ready!
I wouldn't even know where to start with that project!
maxout01
VIP Member
srxbully said:ready for what?? we didnt get snow until; the middle of febuary last season.
Yeah.. Thats why this year I aint worried about any of it yet, lol! which in fact depresses me in it's own right..
nben
VIP Member
Blkhwkbob said:I wouldn't even know where to start with that project!
Getting a little closer everyday. Got the suspension mocked up today with the new track and the rear heat exchanger installed with the bumper etc. 144 xtra-lite with a 2" set back and offset axle reversed worked great. Had to trim the rail tips for the extros. Still waiting for a few parts but I think it COULD be ready in about 7 more nights. Once the footwells are figured out it will go fast.
ViperXC
New member
Wow you really tore that down nben! I thought it was just the rear you were working on replacing but I suppose if you drop and rolled it, tis easier to take it down that far. XC