Help me stay away from a melt down..........

[98700]

SRX, NOT SXR................Tomseal, my eninge has been ported, heads shaved, squish angle tinkered with, Reed spacers and now the PI pipes (with the stingers). The engine had 152.5, and 42.5 on all three before the pipes where on. Now has 155, and 45 with the pipes

 

[98700]

also any contact info for PI would be GREAT........

Nik

 

[98700]

Anyone?, Turk???????????????????

 

[daman]

98 what else ya need to know? your plenty rich(safe) right now,just get on her and test,tune check plug color..

 

[98700]

I was joking about coming to help me, lol. But anywyas. The carbs arent on the sled yet. Is there anything else i should look into before starting the sled, and tuning it?

Nik

 

[daman]

I was joking about coming to help me, lol.

^ lol

But anywyas. The carbs arent on the sled yet. Is there anything else i should look into before starting the sled, and tuning it?

just make sure your timing chain for the power valves are @ 6 oclock
up @ the servo..befor starting..

 

[98700]

^ lol


OUCH!!!!!!!!!!!!!!!!


just make sure your timing chain for the power valves are @ 6 oclock
up @ the servo..befor starting..

WTF???? How would i do that. I need pics, lol.

 

[daman]

you know where your servo cover is?

 

[98700]

yeah, i know where it is.

 

[daman]

well don't take it off because i was just mess'en with ya.....

pay backs are hell...lol

 

[2ooosrx]

lmao @ daman. Nik, that tuning should be fine for you and it should be on the safe end aswell. Just go out, hit the gas and look at the plugs. As long as your carbs are clean, the jetting should not cause you to melt down. Go enjoy the sled!

 

[daman]

lol.......


Anyway yup you'll be fine, if carbs are clean and adj. just jump on 'er and try it out.

 

[modsrx]

i'm running 152.5 with stock pipe ..ported .air box gutted ,i'm on the ritch side so....

 

[98700]

I was running the same modsrx. and i had similar mods.

Daman... OUCH........ thats hurts. Just looking over it now, i was like timing chain, WTF. LOL.

But i hope I am all goodwith the jetting. I took the old phazer out for a little run today. Boy, do I miss the smell.

But thanks guys.

Nik

 

[daman]

Daman... OUCH........ thats hurts. Just looking over it now, i was like timing chain, WTF. LOL.

But i hope I am all goodwith the jetting. I took the old phazer out for a little run today. Boy, do I miss the smell.

But thanks guys.

Nik

lol just play'en with ya bro, had to pay back ya a litte....

anyway keep us posted on the srx thing...

 

[98700]

Will do and thank you all for your help. Greatly appreciated.

 

[98700]

I was going through some old posts, and noticed I didn't get back at you guys. So here it is:

I took the sled out and melted the PTO side! Not really, Everything went well. the jetting was right on. So I went out for a weekend, and had some fun!

LET IT SNOW!!!!!!!!

 

[Triple X]

You might want to invest in a set of exhaust gas temp gauges.

 

[98700]

I already bought one.

 

[Triple X]

Go by both plug colour and EGtemps and you should be fine. My ported, airbox mod, v-force and Bender canned SRX7 has PTO-153.8, CENT. & MAG 152.5, fuel mixture screws 1.5 turns out is good down to -29C.