If you could find someone to make some electonic converter to change the output then it would. when i build my next sled i will work it out
venture with a rx1 guage
- Thread starter BETHEVIPER
- Start date
staggs65
Moderator
what year ventures were the viper based ones? I'd like to find one of those.
I believe mine was the last year for the sx style, 03. The next year they went viper couled, the ones I remember seeing were a silverish light blue.
2001srx700mod
New member
Is a 2001 srx the modern electronic ignition style like a viper? Could a viper pod go on an 01
yes, I have done one of those as well. same issues. works great.
TRIPLESWILLNEVERDIE!
New member
So you used the rx1 speedo/tach harness and it was direct plug in to the venture harness or did you have to move pins around. Ive got an 02 Mountain Max and an 03 rx1 guage cluster. Do I just need the rx1 gauge harness or is there more to it. I just need the tach to work. Not worried about speedo right now.
TRIPLESWILLNEVERDIE!
New member
OK so I got an RX-1 harness and spliced it in with a little help from the wiring diagrams and it works great. I went with a 99 gauge pod so the gauge is more protected. I ride mountains so the sled get rolled over on a regular basis.
03viperguy
Moderator
Really looks great!
sifton
Member
So. I have a 2000 MMax, can you direct me to exactly which parts I need to make this conversion? I looks awesome!