Does a drop in engine minus the clutch for $600 sound reasonable? Not sure on the mileage or year, but claimed it came from a running sled.
daman
New member
no you can do better then that...but that would be a good option too, findlaidt said:
a compleat motor,then part out whats good on yours..
Found another one, out of a 97, 2800 miles, $450.00
With clutch and recoil, no carbs.
With clutch and recoil, no carbs.
Has anyone ever seen how much oil comes out of an oil pump? Should there be a steady flow, or more of a drip?
daman
New member
thats getting a little better.....laidt said:
daman
New member
i've seen 'em go for 450 and under on steal-bay in the past, should be
able to find one W/O clutch and carbs for 425 or under..
few years back had a '95 500 i couldn't give away,,,gave it away for 300...
i guess 450 wouldn't be too bad for the milage........
able to find one W/O clutch and carbs for 425 or under..
few years back had a '95 500 i couldn't give away,,,gave it away for 300...
i guess 450 wouldn't be too bad for the milage........
This motor for $450 is from the older body style for 97. Will it work in the new body style for 97?
daman
New member
huh??laidt said:
smokin george
New member
motor
There"s a guy parting out a 97 V-Max on Hardcore in the classifieds
There"s a guy parting out a 97 V-Max on Hardcore in the classifieds
daman said:
In 97, there was the VMAX with the pogo stick front suspension, and the VMAX with the newer style front suspension. Will the motor from the Pogo Style work in the newer style? I assume it will.
daman
New member
The only sleds in '97 to have the T.S.S front suspension was:laidt said:
Vmax-4 800
Venture XL(480fan)
Venture TR(480fan)
Phazer
Ovation
Brovo
VK540
NONE of the motor's would work in your '97vm
the only sleds in '97 with a 600 twin(to fit your's)had the Pro-Action suspension.(NON T.S.S)
witch inculded;
Venture
vmax SX
OK, so if the motor is out of a 96 Vmax 600, will it work ok?
daman
New member
No,,
try to find the same motor as yours,they made that 600 twin from '97 to '99
in;
venture
Vmax
try to find the same motor as yours,they made that 600 twin from '97 to '99
in;
venture
Vmax
What is the torque specification for the cylinders as well as the head? Is there a pattern for tightening the head that I need to follow? Um, what is the recommedation for using this sled with a new top end? Should I mix the oil with the gas? Any break in? Any tips or tricks would be appreciated.
daman
New member
cylinder torque is- 24(ft lbs)laidt said:
head torque is- first round 9.4 (ft lbs),second round is- 17(ft lbs)
you can pre-mix some gas would be a good idea so you'll know the oil pump
is primed,don't go hog wild with the pre-mix tho,50-60:1 is plenty...
head bolt pattern
SXRAY and Damon, thanks for your help with this thread. SXRAY, the used cylinder and piston assembly worked great. I re-used my best cylinder, and piston assembly and got 110 compression in both cylinders. I took the sled out yesterday for about an hour and I couldn't tell any difference then what it was before. I pre-mixed this tank and verified I am using oil as well with the new pump properly primed. Good to go for Hurley this weekend. When I get back, I plan to put new rings in to see if I can get any better compression, depending on how she does in Hurley this weekend. Once again thanks for your help.
patsxr700
New member
Your gonna have to get some pistons but you are going to bore that one cly thats all marked up.. So one you will need std piston and the other one u are gonna have to go next size up. You might as well get the wrist bearings too.. they are cheap.. but go with dennis kirk they will probbly have like 4 differnt brands of pistons you can choose from..
sxray
Member
glad to hear you got it back together and didn't miss your trip to hurley. ray