braindead1684
Member
daman
New member
Should be a serial # somplace on it,mag side by water pump belt housing,
looks like the older twin vm case '94-96...
need a vin to tell ya what year
looks like the older twin vm case '94-96...
need a vin to tell ya what year
braindead1684
Member
its not the same as our 94 or 96 case and the mounts are different
braindead1684
Member
The one end has a roller bushing i guess (not sure exactly thats what i was told) does that help at all?
daman
New member
look for that ser.# should be there....what were you told it was from?
braindead1684
Member
it was suppose to be from a 94 vmax 600. I am not at home right now so i can't look but i will check for the number when i get home. what should i look for on the serial number to know what its from.
daman
New member
if it's a '94 600 should read one of these....
8CA
8CF
8CC
8CB
8CA
8CF
8CC
8CB
Dave_Vmax600
New member
doesnt look like a 94 600 case
Dave_Vmax600
New member
this is a 94 bottom end
click for larger size
I can tell right away that the mounts are different....
94 case uses 3 mounts.
that looks like a long block too.
click for larger size
I can tell right away that the mounts are different....
94 case uses 3 mounts.
that looks like a long block too.
braindead1684
Member
the block appears longer but i think the crank is the same length, still haven't look at the cases for the numbers. The bearing are different and we don't need cases his cases are fine its just a matter of pressing the bearings from one of the 2 cranks we have onto this one if they are identical otherwise.
daman
New member
the case number will tell ya what crank you have...
braindead1684
Member
ok i will check which ones will work in a 94-96 motor (other then listed above)?
braindead1684
Member
8cr0001 y1 is the case no
800
New member
That is definately a 97-98 twin case, it does not have the seperate water pump/recoil housing. The cases are different, as well as the crank.
daman
New member
From what i found out that case could be a 500 or 600(were the same) '97braindead1684 said:
to '01 v-Max,,if we knew what cc it was that would narrow down the years
because they only made the 600 3 years, '97-'99,,the 500 went a few more
years till '01..
so yea it's the newer vm case...
FuzzButt
New member
Sorry I'm late to view this post. Ya that looks an awful lot like the case of an '97+ motor. Spent a lot of time looking at that case.
Sorry for it not working out the way you had planned.
Dave, Why is the bottom of you '94 block so shiny?
Sorry for it not working out the way you had planned.
Dave, Why is the bottom of you '94 block so shiny?
braindead1684
Member
the main question is if the crank will work? it looks very similar to the 94-96 with the exception of the bearings?
Dave_Vmax600
New member
FuzzButt said:
Because i sanded it down smooth then primed,painted, and clear coated the whole block.
Except the jugs....they were glass bead blasted.
800
New member
the crank is the same except for the end mains
braindead1684
Member
mains = main bearing i assume.