Installing my Primary clutch on my 98 srx700 Per Yamaha manual lube bolt & torque to 85ft lb I have read other posts stating after torque to 85ft lb loosen & retorque to 45ft lb, the manual dosnt have that step. what is correct?? Thanks
Yama49601
Member
The book for a 2000 SRX shows first is 85 ft. lbs. and final is 43 ft. lbs. and I am sure it is the same for yours.
Yama49601
Member
Tightening steps:
1.Tighten the bolt to a torque of 120 Nm (12 m • kg, 85 ft • lb).
2.Loosen the bolt completely.
3.Retighten the bolt to a torque of 60 Nm (6.0 m • kg, 43 ft • lb).
1.Tighten the bolt to a torque of 120 Nm (12 m • kg, 85 ft • lb).
2.Loosen the bolt completely.
3.Retighten the bolt to a torque of 60 Nm (6.0 m • kg, 43 ft • lb).
YAMMIEGOD3:16
Active member
CORRECT INFO. 3:16 (yammie tony)