Reverse on my SRX

naw, mine only has 1 nut on it, which is obviously the problem, as there's no way to lock this one in place.... sheesh... I guess I need to look for another cable
 
i bet you could just glue it in there with some good glue as long as you got just a bit of tension on lever the cable shouldnt come out once glued..zip tied,,caulk,or some epoxy puddy ? .......i havent had that problem with mine ..and now i am wondering if mine has 2 nuts or one ..i honestly cant remember ill have to look ...cause i dont think you can take them off or put more on .... i am just wondering if the cable has too much cable comming out of the end causing the cable to come out?? ....almost like bracket needs to be a hair longer ....?? also you mentioned you zip tied the cable in did you try just letting it hang loose ? so the when reverse is off it can distribute the 1/2 of slack over the whole cable ..instead if the last few inches that the cable isnt tied tight to something .......kinda hard to explain hope you understand what i mean ....just fine tunning it now ia all ...dont give up you got this far
 
well I did leave it loose, but that allowed too much play in the cable itself, and it would lose its engagement in the holder.

Its sooo dam tight in there, I had to heat and bend a cheap 10MM wrench to tighten the one nut.

I am going to try some epoxy, or maybe I can melt some solder on the thread to prevent it from working itself loose.

Your're right, dont need a ton of pressure, just enough to keep it in place....

Yeah, I slept on it, and Im not giving up just yet...LOL

I love taking my pipes off 15 times in a row, doesnt everyone?

So "operation hold that god-dam nut in place" is in effect, but the wife is not to keen on more night(s) in the shed, so maybe mid week..LOL

Its still cruises in forward so.....lol
 
You must log in or register to reply here.


Back
Top