pics of banshee with ski's

amatosrx

amatosrx

VIP Life Member
Joined
Mar 21, 2006
Messages
1,405
Location
byron center mi
here is my 95 yamaha banshee with some ski's on it i used some srx spindles and made some plates for the hub had them welded then i powdercoated them. it works good in the snow it rips.
 

Attachments

  • 100_2080 (2).jpg
    100_2080 (2).jpg
    260.4 KB · Views: 30
  • 100_2081 (2).jpg
    100_2081 (2).jpg
    234.6 KB · Views: 20
  • 100_2084 (2).jpg
    100_2084 (2).jpg
    260.1 KB · Views: 18
What do the skis do when in the air or doing big wheelies or is the travel limited by something. I would be afraid of the ski getting out of place and rolling over.
 
sandmanmike1 said:
What do the skis do when in the air or doing big wheelies or is the travel limited by something. I would be afraid of the ski getting out of place and rolling over.
Click to expand...
i have a nut and bolt in the brake rotor to limit to movement. it works great you can weelie jump and go 80 miles and hour with out a problem.
 
So when are you gonna let me swing by and let me take it for a rip? That looks like a blast!!!
 
hey amato you got another set of those brackets? I got a set of SXr ski's and a piped Banshee I dont ever ride. How did you make em? 'm just up the road a bit in Sparta...
 
BBlueSRX said:
hey amato you got another set of those brackets? I got a set of SXr ski's and a piped Banshee I dont ever ride. How did you make em? 'm just up the road a bit in Sparta...
Click to expand...
i used a set of spindles form and srx and cut them short then made the flat plates for the bolt pattern. had them welded then i powdercoated them. you will need a set of spindles 1/4 inch plate steel and i could help you with yours.
 
Before I bought my viper a few years ago, I fabbed this up on a whim. Flotation and traction were great but it took a ton of horsepower. It attracted lots of attention though!

102_2270.jpg


102_2236_1_resized-1.jpg
 
You must log in or register to reply here.


Back
Top