harness racer
New member
ya it was a little wet coming out from camp on sunday. good news is all the wood is done. i even know of a little spot in the woods with a couple of good straight streches to strech out sleds.
kirkswim got the viper running and now needs some goot wot to double check clutching and jetting.
let me know if you guys are trying again this weekend as i can bring my slow 4 stroke out to play.
kirkswim got the viper running and now needs some goot wot to double check clutching and jetting.
let me know if you guys are trying again this weekend as i can bring my slow 4 stroke out to play.
harness racer
New member
im back up and running and i am so p***** about today im going out tomorrow morning before work i got to be @ the store by 10 am , i got to wrench a bit tonight but i dont care
only ice this morning and a 30km wind to boot damn
i still have kirks crank 's do you wnat me to sit it in a bath of oil ?
only ice this morning and a 30km wind to boot damn
i still have kirks crank 's do you wnat me to sit it in a bath of oil ?
srx2000
New member
harness racer
New member
welcome to the site Dave !!!!!!
yamajohn
Member
Nice pic's dave. Should of come out tonight put on about 50 miles of lake blasting. In the top picture thats my 01 in the middle.
jabber800
New member
John any of you guys going out this Sat?? I just picked up another SRX and was hoping to get it out for a day of running..
harness racer
New member
Dan Got Another One.....lol... I Need One Too.
jabber800
New member
Made a deal to trade my Apex.. I'll be meeting the guy tomorrow to make the switch..
Can you sort through your belly pans for the left and right side panels in blue for me Vince?? Looking for clean undamaged parts. I want this sled to look like new when completed.. I'll come by this weekend or early next week and pick them up..
Can you sort through your belly pans for the left and right side panels in blue for me Vince?? Looking for clean undamaged parts. I want this sled to look like new when completed.. I'll come by this weekend or early next week and pick them up..
harness racer
New member
Belly Pans
iLL WAIT TILL YOU COME OVER , THAT WAY YOU CAN CHOOSE YOUR OWN ..
DO YOU STILL HAVE THE 600 ENGINE ?
iLL WAIT TILL YOU COME OVER , THAT WAY YOU CAN CHOOSE YOUR OWN ..
DO YOU STILL HAVE THE 600 ENGINE ?
jabber800
New member
Yes but I robbed a few parts from it.. Bolts O-rings etc.. Nothing major..
yamajohn
Member
Yes sir we will be going saturday and sunday. We may even get one more trail ride in up to chinicouchi, but not sure which day.
nice! let me know as kirk swim and i will have all the sleds loaded in the trailer on friday.
harness, i will call kirk and tell him about the crank. for now just cover it with a oil damp rag if you would please.
harness, i will call kirk and tell him about the crank. for now just cover it with a oil damp rag if you would please.
valin
Active member
srx2000 said:
Is that Willis I see in one of those photos? Man, he practically lives at Rocky's.
harness racer
New member
valin said:
HE'S WAITING FOR YOU ...I AINT GOT ENOUGH POWER !!!!!
IM GOING TOMORROW , IM SURE HE WILL BE THERE !!!
valin
Active member
It's pretty hard to beat a 1200 cat big bore full of chisels with my trail setup and 96 1" gold diggers, although, I did run 9 mph faster than him in 2000'.
I'd line up with him if I was running chisels, but I sold all of mine, so i'm out. I'd line up against anybody.
I'd line up with him if I was running chisels, but I sold all of mine, so i'm out. I'd line up against anybody.
Last edited:
harness racer
New member
nothing would please me more ill loan the chisels and help to put them in ......after all hes only got a litlle 1000 ...lol....
nice avatar ryan ...
nice avatar ryan ...
valin
Active member
I can only run 1" chisels now. I would throw them in to go do some draggin on the ice.
