YAMAHIZAL700
New member
Any one ever have this happen. Also what tap will I need to fix the shafts threads. ANy thoughts?
the thread is 10mm x 1.25. make sure to use loctite. when using loctite make sure the hole in the shaft and the bolt are free of oil or it wont work.YAMAHIZAL700 said:Any one ever have this happen. Also what tap will I need to fix the shafts threads. ANy thoughts?
Sounds good. I have a can of parts cleaner ready to roll and a fresh tube of locktite!ON a happy note: I dont think I ll ever sell my sled. I have gone through most everything in the sled and it always get me back home. Hell, even when I bought the thing blown up(not knowing years ago) It still got me about 25miles from the trailor back to the truck on barely two cylinders.9801srx said:the thread is 10mm x 1.25. make sure to use loctite. when using loctite make sure the hole in the shaft and the bolt are free of oil or it wont work.
daman said:flat side out,nub goes in.
Yeah, my gears had no number stamp and daman I gave the bolt a bath in loc tite after using brake cleaner to get everything nice and clean. SHould be all set now.daman said:not all gears have a number stamp.![]()