Phazer pipe

P

phazerguy

New member
Joined
Dec 6, 2005
Messages
198
Age
40
Location
SE WI
Just picked up a psi pipe for a phazer. What is the difference between the one that exits out the stock hole and the one that you have to cut a hole in the pan for?

Thanks
 
Hmm i did not realy understand your question.Does your pipe exit the stock hole?i you have to cut a new hole,you may have the wrong y-pipe
 
I'll try to post a pic later. It does say psi on it. fits fine everywhere except at
the end, needs a hole about 2-3 inches behind stock hole.
 
Is there anywhere that sells good used phazer parts? Id love to put a pipe on my phazer, but i sure dont want to pay a couple hundred bucks for a pipe on a '88 phazer. Especially since I'm getting a new sled next season.
 
phazerguy said:
I'll try to post a pic later. It does say psi on it. fits fine everywhere except at
the end, needs a hole about 2-3 inches behind stock hole.
Click to expand...


I had this also and found out the pipe was actually for a exciter. I have three phazers all with PSI pipes they should have a return curl at the end so it goes out the stock hole
 
I am running the follwoing:
MAN102/221 152.5 jet
YA90501-520A9-00 Compression spring
YA8VO-W176A-00-00 Weights
 
towman said:
has any body did the carb mod to needle? how does it work
Click to expand...
I did not change my needle just the jets. Did someone tell you that the needle had to be modified?
 
There is no needle in those carbs. do a search on the phazer carb mod and you will be able to find the info you need. What is your riding style? Aggressive or do you do a lot of slow riding? If you stay out of the midrange you won't need to do anything but change to mains and maybe pilots. I ran 105 pilots and 147.5 to 150 mains and never had the sled burn a piston and thats with a ported engine.
 
If it is a PSI pipe it should exit out the stock hole. PSI did build a set of twin phazer pipes but that was a different story in itself. Now AAEN built a single pipe that exited out the stock hole called the Quiet can for trail use and they also had a Race pipe that did exit out the side panel which needed to be cut. That pipe was for a race ported motor only and was loud too. Hauck used the Race pipe on his improved stock Phazers years ago.
 
You must log in or register to reply here.


Back
Top