jmp2204
Member
sled 02 srx 6100 miles
clutching- h/c red primary,4.3 in the tip ,bolt and 4 washers heel
green secondary spring 52/44 helix
In setting up my clutching ,running against another srx for comparison we noticed after doing a few good runs my sled would start to fall off on the top end.At first it would pull some lengths on the other srx and hold the distance for the duration.after a few runs it's like it would hit a wall ,you can actually feel the sled stop pulling(at over 100 on speedo).and the other srx would keep on pulling right by.The other srx riding said to him it felt like the dcs was activating (but there no light) like i say at first it would continue to pull til we ran out of room ,but after a few runs ,it would hit the wall.Has anyone else experienced this problem????
....Suspect so far is maybe the two (cap and sheave ) clutch bushings as they have never been changes and there is some play.
Any other ideas?
clutching- h/c red primary,4.3 in the tip ,bolt and 4 washers heel
green secondary spring 52/44 helix
In setting up my clutching ,running against another srx for comparison we noticed after doing a few good runs my sled would start to fall off on the top end.At first it would pull some lengths on the other srx and hold the distance for the duration.after a few runs it's like it would hit a wall ,you can actually feel the sled stop pulling(at over 100 on speedo).and the other srx would keep on pulling right by.The other srx riding said to him it felt like the dcs was activating (but there no light) like i say at first it would continue to pull til we ran out of room ,but after a few runs ,it would hit the wall.Has anyone else experienced this problem????
....Suspect so far is maybe the two (cap and sheave ) clutch bushings as they have never been changes and there is some play.
Any other ideas?