W-Arm Fixed...what do you think?

[timl1978]

Arm is all welded up. Any comments or concerns. I doubled checked and it shouldn't interfere with other components...

 

[fourbarrel]

Looks like it should hold to me,it's actually quite similar to the type of repair I did to mine before I changed the skid for an SC10 II.

 

[BARON 8BU]

Keep an eye on it. Take a peak at it after every ride. Might as well blast it and paint it while you have it out.

 

[staggs65]

yeah that's probably plenty, i way overkilled mine when i repaired it, like fourbarrel, i'm looking for an sc10, so it won't be a concern for me anymore

 

[mtnmaxman600]

The way mine was broken it was below your gussets so I really beefed mine up. here is a picture of the way I beefed mine up I am sure it is over kill but I only want to do it once.

 

[timl1978]

Thanks for the feedback...I will keep an eye on it. I didn't want to do too much because of the added weight. I already drink too many beers...

 

[staggs65]

i actually did mine with even more gusset than mntmaxman600s, like i said probably way overkill, mine broke right at the joint so your gussets would work for my break anyway

 

[Concept Carbon]

Looks good, I would check out your center shock.

 

[chris189]

Hey check out this thread. I added the bearings, it works great! Get rid of the crappy plastic! That is what hammers the w arm so bad.


http://www.totallyamaha.net/forums/showthread.php?t=30541&page=2&pp=10

 

[Gagt518]

How hard is it to remove the W-bar? Need to remove anything else? Like the shock

 

[staggs65]

How hard is it to remove the W-bar? Need to remove anything else? Like the shock

shock and limiter straps