xrrider
Member
Hey,
Would it be at all possible to mount a skid out of a 07-09 Nytro into a older V-Max with the pro-action chassis, or are the tunnels on the new four-strokes that much different. How about ride quality of that particular suspension? Searched around for that type of skid swap and didn't find much.
Thanks for any input.
Would it be at all possible to mount a skid out of a 07-09 Nytro into a older V-Max with the pro-action chassis, or are the tunnels on the new four-strokes that much different. How about ride quality of that particular suspension? Searched around for that type of skid swap and didn't find much.
Thanks for any input.
I did a Nytro XTX skid into a Viper. It is very doable, just takes a bit of planning, design and fabrication. There aren't too many who have done it so you are kinda on your own. I can maybe offer some help if you can get all the measurement from the Nytro skid. I only have the XTX measurements which are different.
The XTX skid is night and day a better ride than the ProAction. Having ridden the shorties too, a 121 Nytro skid should ride very well in a Vmax.
The XTX skid is night and day a better ride than the ProAction. Having ridden the shorties too, a 121 Nytro skid should ride very well in a Vmax.
xrrider
Member
Sounds good, thanks for quick info. Will for sure hit you up when it comes time to do the swap. What exactly is the XTX, package?
The 144 inch crossover sled.
MrMax
New member
I am swaping a mtx skid, into my mm700 soon. Any measurements would be great.
I don't have the MTX measurements, but I can tell you that they are different than the XTX.
I can also tell you that your swap is more common than the one I did.
I can also tell you that your swap is more common than the one I did.
The Nytro MTX will be back in my garage next week some time, definetely by Friday. If you can wait, I'll see what I can do for you. You may have to bump this thread to jog my teflon coated memory though.