Does your light flash upon start up. Temp light? Please post poll thanks

Does your temp-oil or tors light flash on start up?

  • 95 or older twin yes

    Votes: 1 1.9%
  • 95 or older twin no

    Votes: 0 0.0%
  • 95 or newer twin yes

    Votes: 14 26.9%
  • 95 or newer twin no

    Votes: 2 3.8%
  • 00 and older tripple yes

    Votes: 10 19.2%
  • 00 and older tripple no

    Votes: 15 28.8%
  • 01 and newer tripple yes

    Votes: 11 21.2%
  • 01 and newer tripple no

    Votes: 1 1.9%
  • Is your sled stock

    Votes: 16 30.8%
  • Is your sled modified

    Votes: 4 7.7%

  • Total voters
    52
no not wierd it is just yamaha should do this from what I am seeing

I talked to another guys about this that an multiple yamahas from the vmax 4 till now and none do this. I wonder what the catch is. I wonder what makes them blink....... It is killing me to find out..... :o|
 
I wondered the same thing.... best I could come up with is low voltage.

maybe the temp sensor is set up to expand as the temp rises increasing the gap and lowering voltage; when you first start the motor voltage produced is low enough the idiot box sees it as over temp!!!
 
thstorms said:
I wondered the same thing.... best I could come up with is low voltage.

maybe the temp sensor is set up to expand as the temp rises increasing the gap and lowering voltage; when you first start the motor voltage produced is low enough the idiot box sees it as over temp!!!

Good piont. So what makes it stop working then? Why won't it work if you loop the wires or disconnect the sensor?

hhhmmmm
 
looping the wires is a direct short, simulates ice cold motor sensor contracted to the point of a direct connection...... unplugging the sensor should make the light solid or breaks the circuit so no part of that circuit will work......maybe
 


Back
Top