j.e.1975
Member
I know it's not good pratice but has anyone had any experience reusing viper gaskets. Tore the motor down to check it over and I'd like to know if these gaskets can be used on the rebuild.
Thanks
j.e.1975
Thanks
j.e.1975
reuse gaskets
- Thread starter j.e.1975
- Start date
mopar1rules
Active member
get all new gaskets.
tntmax
Member
Yup all new gaskets, and no aftermarket cheepies, well worth the piece of mind
snowcrazy
New member
never tore my iper down yet but have reused them on my srx and xtc with zero problems as long as they are'nt damaged on removal
Mac
Member
I re-use gaskets. I use a copper spray when assembling motors. I only replace the head gasket if the Teflon coating is pealing.
hereismylife
Active member
Mac said:
I do the same thing never had a problem. That copper spray works great if done right.
You have to make sure the gasket and surface on engine is clean.
007redline
New member
hey
Was going over The same thing in my head (re-use gaskets)lol but when you really think about it...you can answer that question your-self....No sense chancing the qaskets not sealing...expecially for the price of an engine.. :-)
That's a gamble I'm not willing to take...and if you don't replace them it will be in the back of your head everytime you go for a drive...
Was going over The same thing in my head (re-use gaskets)lol but when you really think about it...you can answer that question your-self....No sense chancing the qaskets not sealing...expecially for the price of an engine.. :-)
That's a gamble I'm not willing to take...and if you don't replace them it will be in the back of your head everytime you go for a drive...
ryanryan
New member
007redline said:
x2, and there is nothing worse than that feeling!!..."Is it gonna be alright? What's that weird noise I just heard? Is something going wrong? What was that weird feeling?" lol, I HATE it!!!
