lakeofthewoodsrider
New member
I would like to know if there is a way of telling if there was any mods done to my motor. I bought it used, and the kid I bought it from only had it for a year. I was running the lake today....running VERY fast, rpm around 8800 / 9000. As always, use perm gas. new plugs. no picks, cleaned the clutches, power valves.
Would I be able to tell if it were ported?
Nothing could touch her today...that I came up on.
Would I be able to tell if it were ported?
Nothing could touch her today...that I came up on.


bluemonster1
LIFE MEMBER ONLY ONCE!!!
which Lake were you running on that is frozen?

staggs65
Moderator
unless there was alot done to it you'll be even faster if you get rpms down, to check for porting best thing would be pull a head and check the portsrunning VERY fast, rpm around 8800 / 9000
You didn't meet up with bluemonster yet, He'll show you how to put wings on a SRXlakeofthewoodsrider said:I would like to know if there is a way of telling if there was any mods done to my motor. I bought it used, and the kid I bought it from only had it for a year. I was running the lake today....running VERY fast, rpm around 8800 / 9000. As always, use perm gas. new plugs. no picks, cleaned the clutches, power valves.
Would I be able to tell if it were ported?
Nothing could touch her today...that I came up on.![]()
harness racer
New member
bluemonster1 said:which Lake were you running on that is frozen?
blue who said it was frozen ?

bluemonster1
LIFE MEMBER ONLY ONCE!!!
vince..if it wasn't frozen..don't you think he was just lucky to keep afloat.......while others were going under.I can go fast on open water because I have WINGS..LOLLLLL

bluemonster1
LIFE MEMBER ONLY ONCE!!!
You better you bet you better...my SRX can fly!!!!!!! lollllllllneedaSRX said:You didn't meet up with bluemonster yet, He'll show you how to put wings on a SRX

bluemonster1 said:You better you bet you better...my SRX can fly!!!!!!! lollllllll![]()
it fly on grass this year lolllllllllllllllllllllllllllllllll

bluemonster1
LIFE MEMBER ONLY ONCE!!!
mod..shut that window and keep your head inside, stop looking out for snow will ya.....lollllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll
lakeofthewoodsrider
New member
I was running on lake of the woods , and then a couple other in kenorabluemonster1 said:which Lake were you running on that is frozen?
lakeofthewoodsrider
New member
Were should I get the rpm's down too

staggs65
Moderator
84-8500
lakeofthewoodsrider
New member
what are your ideas to bring down the rpm's

staggs65
Moderator
generally you adjust rpms with your primary weights, i'm no clutch expert but the clutchers here are going to need to know everything about your current setup to help ie: what weights/rivets, primary spring, helix, secondary spring, how much wrap on secondary spring, also are you running a new oem belt ( a worn or cheap aftermarket belt will affect rpms)
lakeofthewoodsrider
New member
10 to 12 inches of ice on lake of the Woods....trucks are on the ice too!
RIVERRUNNER
Active member
lakeofthewoodsrider said:10 to 12 inches of ice on lake of the Woods....trucks are on the ice too!
Wow thats pretty impressive!!! Only about 6-8 down here!!
lakeofthewoodsrider
New member
Ya, but we only have 8 inches of snow on that ice...no too good for hook up, I don't have any picks
Todddob
New member
1 inch of snow here, 14 inches of ice
lakeofthewoodsrider
New member
you might have to pick your track as well.Todddob said:1 inch of snow here, 14 inches of ice
