My Viper running lean??

One thing I noticed was that someone had the oil line off from the tank to the pump. I noticed a white nylon wire tie on that hose rather than the metal one yamaha uses at the pump end of the hose.
 
Z06 FAN said:
Ok where should I go from here then?? The most I can adjust the cable to would be about 15mm. Would this give me enough to richen it up? Personally I would not think it would be enough to get me to the 50:1 that I want. I did notice the cable would hit the stop when you pinned the throttle. But whe released it would only go half way and not hit the stop on the closed throttle. Maybe the wrong cable?? This sled is new to me and this was my first time riding it.
do you mean the arm of the pump?
 
kirk700 srx said:
I think you may have a blockage in your oil tank . I would take off the tank and empty it . A ring from an oil container may be blocking the passage it happened to me so It can happen to you! J to the R.O.C ... lol

Just pulled hose off the bottom of tank and It flows good!
 


Back
Top