04 viper Clutching 660ft Hauck tripple

T

timd222002

New member
Joined
Dec 7, 2009
Messages
124
Age
43
Location
Maine
Looking for advice on clutching for 660. I see alot of people on here with recomendations for clutching but there recomended rpms are alot lower than that of haucks pipes. Hauck recomends 8900 too 9200 rpms for there tripple pipes. Any suggestions?
 
The ride
 

Attachments

  • 006.JPG
    006.JPG
    31.5 KB · Views: 1
  • 002.JPG
    002.JPG
    113 KB · Views: 1
  • 005.JPG
    005.JPG
    124 KB · Views: 1
timd222002 said:
It has a a 0 9
Click to expand...

you'll have 4 #'s stamped on it......0, 3, 6, 9.....that's for hole identification. there should be a letter stamping on it somewhere. is there maybe a "V"?

also, on the secondary spring, the yamaha springs are black, but will have a paint color dot on one of the springs coils. stock on your sled is red, but most people switch to green when changing up the clutch setup. so, what color dot does your spring have?
 
mopar1rules said:
you'll have 4 #'s stamped on it......0, 3, 6, 9.....that's for hole identification. there should be a letter stamping on it somewhere. is there maybe a "V"?

also, on the secondary spring, the yamaha springs are black, but will have a paint color dot on one of the springs coils. stock on your sled is red, but most people switch to green when changing up the clutch setup. so, what color dot does your spring have?
Click to expand...

It's an X?
 
You must log in or register to reply here.


Back
Top