Yamahead

[SRX it is]

Can you fix worn powervalves? The top part is grooved and worn somewhat on the upper flat area. Not talking about the narrow face part.

 

[YA*AM*A*HEAD]

got a picture ? not exactly sure what part you mean

 

[YA*AM*A*HEAD]

does it have the 4 or 5 groves worn into the bottom side of the valve ?

 

[SRX it is]

Yes i think thats it On the flats A mark that looks like where the valve slides in and out of the exhaust port.

 

[SRX it is]

It looks like wear from use almost 5000 miles on valves

 

[YA*AM*A*HEAD]

no i cant fix that but i do have a set of cores on there way back from canada

 

[SRX it is]

They're cut for 800 kit, could you match them if I sent them to you?

 

[YA*AM*A*HEAD]

let me get back to you on that ,,i personally cant but i got a good friend that runs a cnc machine shop ...i think might be able to ...can you post a picture of were its cut for the 800 ....i just did some 780 valves the other day and just the very botton edge was cut back valve face and valve body were untouched ...just need to see yours first so i know what part needs matched

 

[SRX it is]

I'll get you one in the morning. Thanks for your help. Ya I know it's morning know, but I still have some hair left. I'll talk to you then.

 

[YA*AM*A*HEAD]

no problem night time is the best time to catch me ...usually check in all night long