how do u remove tors switch???

[yankeeslover]

i think the tors switch on my carbs is faulty.. how does one remove it so i can check it or replace it? i dont know enough about carbs to mess with them, do i have to do anything to the carbs to remove the switch? the throttle cable has play to it, so i dont think that is what is causing the tors to activate... how do i remove this switch? details please.. im real dumb when it comes to mechanics..thanks

 

[methanolhemi]

To check just unplug the 2 tors wires and plug
them into each other. Run engine and see if it
fixes your problem.

 

[yankeeslover]

that fixes it

i just want to know how to fix the tors system...the throttle is not tight, it has good normal play.. what else other then a faulty switch would cause this? im just wondering how to replace the tors switch without take out the carbs?

 

[abumpa]

The switch unscrews from the mounting bolt. You do not have to take the carbs off. Here is a photo of a removed tors switch.

 

[backcountry_vmax]

where is the tors switch, on the carbs? where are the wires?

 

[hereismylife]

where is the tors switch, on the carbs? where are the wires?

It is on the carbs near the middle top...2 wires going to middle top of carbs...

 

[backcountry_vmax]

when ever i unplug the tors and plug them into eachother, as soon as the throttle moves, it shuts off but if i hold it forward, it wont do it?

 

[Racing666]

Try unplugging the kill switch from under the handlebar pad and see if it does it.