zigzag
New member
br9es solid top Napa number 3194 BR9ES Solid terminal type (top lead connector thingy dose not unscrew.) Therefore less chance of fouled plugs and carbon tracking is verturally eliminated.
The 5 stands for the pre gap & solid tip,,,,, they are for the doo's gap is .018"........ You want BR9ECS-S solid tip .028" gap........Super Sled said:Anybody know the difference between BR9ECS and BR9ECS-5 is?
I accidentally just picked up BR9ECS-5's today. Dangit!
Should I exchange them for the BR9ECS's?
I read through the NGK page in that other thread and I can't decipher what the extra "-5" at the end stands for....
Thx all.
KAPUSTA said:Just my opinion,I've run Br9ecs in my 600,never had a problem.Also had the Br9s can't say they are bad can't say they are good,but I have found once you fuel soak an NGK through it in the bush,and this seems to happen with the standard BR9's.I have used and got a few fellows using the CHAMPION powersport plug #8902 which crosses the NGK-BR9.They do not quit! Never have fouled,never caused a missfire, bone cold starts always fire up.Believe it or not the proof is when you try them!They have the fine tip on them and they burn clean.
Super Sled said:Anybody know the difference between BR9ECS and BR9ECS-5 is?
I accidentally just picked up BR9ECS-5's today. Dangit!
Should I exchange them for the BR9ECS's?
I read through the NGK page in that other thread and I can't decipher what the extra "-5" at the end stands for....
Thx all.
dragonsm said:When I bought my sled it had the br9ecs plugs in it however they were a year old. The sled came with new plugs but the old ones looked fine and the n ew ones were champion copper plus 805c n2c. Not wantikng to have issues I errored on the side of caution. Are these plugs a cross reference for the champions and could I at least toss them in the pouch for an extra on the trail or just toss them out? I would have never bought them but if they will be fine as a short term pinch....I would keep them as extras.