need help stretching 99 sx 700 to 136'

S

sasksxrider

New member
Joined
Jan 7, 2004
Messages
8
Location
south sask
i am working on stretching out my sx and i ran into a problem when i tried to put my suspension in i changed my drivers to 9 tooth antiratchet drivers and when i went to put in the suspension the w arm hit on the drivers i was wondering if i could use 8 tooth antiratchets or if i would run into the same problem or do i have to run the stock drivers and if 8 tooths fit what else would i have to change and would it affect my track tensioning
 
I just installed the 9th anti ratchet drivers and you do need to grind the tips back alittle , i used a 4" grinder with sand paper on it , took all of 15-20 min. to do , ....its cheaper to take the end off alittle then go 8tooth and have to buy gears ....just my .02
 
I would just remove enough off ot the tips to clear, as it would be the cheapest and easiest thing to do at this point. 8 tooth drivers will clear everything, including a M-10 if you want to change again
 
Shoul have moved your skid back when you stretched it. Would have no problems then. Maxdlx
 
You must log in or register to reply here.


Back
Top