Hauck helix G stamped

[snopax]

Anyone know the angle and wrap needed for a hauck helix stamped G and green hauck spring?

 

[needaSRX]

the angle is 49/41 but don't know about the spring wrap for Hauck green

 

[YAMMIEGOD3:16]

TRY 70 DEGREE 1/6. 3:16 (yammie tony)

 

[staggs65]

not 100% sure but I thought the hauck springs were indexed differently from stock so the formula for your wrap was different

 

[fusion 69]

The springs are the same I beleive, we run the Hauck springs

 

[staggs65]

good enough

 

[mrviper700]

not 100% sure but I thought the hauck springs were indexed differently from stock so the formula for your wrap was different

you were right, there was a differnt indexing. The only spring from hauck like that was the "red sno cross" spring, rest are the same as stock like stated.

 

[mopar1rules]

the angle is 49/41 but don't know about the spring wrap for Hauck green

suppose to be a 49/41, but actual measurements will most likely show 47/39, as haucks helixs like to measure 2 deg less on start and finish from their stamped angle.