Which Yamabond for crankcases?

[gil7247]

I'm putting my motor back together and I see they make 2 Yamabond's. Which one do I use when reassembling the crankcases? Or does anyone have another product that works better?
Thanks Guys
Gil

 

[motorhead327]

I use the grey.

 

[staggs65]

there are more than 2. you want 4 (not 4b)

 

[SXlover]

I used Hondabond 4...which is gray

 

[motorhead327]

I think they are all 3 bond products, like what's on the mail order books!

 

[A couple of bucks]

Or does anyone have another product that works better?

Mopar is what I swear by.

 

[YAMMIEGOD3:16]

GRAY. 3:16 (yammie tony)

 

[gil7247]

Thanks guys Yamabond 4 it is thanks Staggs

 

[fourbarrel]

If you don't have easy access to Yamabond you can use this stuff.http://www.permatex.com/products/mo...cle_MotoSeal_1_Ultimate_Gasket_Maker_Grey.htm

I get it from the local auto parts store but any place that sells permatex products should have it.

 

[staggs65]

If you don't have easy access to Yamabond you can use this stuff.http://www.permatex.com/products/mo...cle_MotoSeal_1_Ultimate_Gasket_Maker_Grey.htm

I get it from the local auto parts store but any place that sells permatex products should have it.

I've used that before too with no issues

 

[gil7247]

thanks for the tip on the permatex. Gil

 

[fourbarrel]

No problem,I find it works every bit as good as Yamabond.I've sealed up a few cases with it and haven't had one leak yet.