63mod
New member
Hey Guys,
I need some advise on my cluching. I have read about all of the posts on here and gained alot of good info , but I am fairly new to adjusting the clutching myself. I have a 2002 sx700r, 1 layer removed from the head gasket, reed spacers and v-force reeds, Bored silencer all done to the motor. I had maxximum perf install a clutch kit last year on this sled (worked great). After it was installed I put a 40 tooth gear on the bottom and a ripsaw track, and added it think 10* to the secondary. still worked good. Just installed a (maxx)roller secondary that I got off e-bay (never used) and the sled seems sluggish, and top speed has dropped about 15mph. the roller came with a 54/38 helix, I have it set at 70* (where it seemed the best) stock secondary spring, red maxx primary spring. I hit the throttle it goes up to 8100, then back down to 8000rpm and stay there, and is not very responsive in the trails. I would like to get the rpms up to around 8400? belt doesnt seem to be slipping and the cluches were just warm after running. Thanks in advance for any help you can give me.
I need some advise on my cluching. I have read about all of the posts on here and gained alot of good info , but I am fairly new to adjusting the clutching myself. I have a 2002 sx700r, 1 layer removed from the head gasket, reed spacers and v-force reeds, Bored silencer all done to the motor. I had maxximum perf install a clutch kit last year on this sled (worked great). After it was installed I put a 40 tooth gear on the bottom and a ripsaw track, and added it think 10* to the secondary. still worked good. Just installed a (maxx)roller secondary that I got off e-bay (never used) and the sled seems sluggish, and top speed has dropped about 15mph. the roller came with a 54/38 helix, I have it set at 70* (where it seemed the best) stock secondary spring, red maxx primary spring. I hit the throttle it goes up to 8100, then back down to 8000rpm and stay there, and is not very responsive in the trails. I would like to get the rpms up to around 8400? belt doesnt seem to be slipping and the cluches were just warm after running. Thanks in advance for any help you can give me.
