iwillwait4u
New member
Hey guys I am new to the 2 stroke side. I bought the wife a 1998 vmax xtc 500 and trying to change the chain case oil no big deal normally. Well it has reverse and I can not seem to get the cover off or find a drain plug??
Any ideas would be great!
Thanks Brian
Any ideas would be great!
Thanks Brian
Devilin AblueDress!
New member
Not familar with that model but have you looked inside the tunnel?
iwillwait4u
New member
good idea I will go check it out. I really dont wanna mess with all that reverse linkage.
iwillwait4u
New member
Devilin AblueDress! said:
Thanks for the help it was inside the tunnel!!!
Kenora
New member
Just pull out the dipstick and suck the oil out the hole with an extractor.....probably help to warm it up with a car heater if ifs cold
mward
New member
If you look inside the tunnel you will find A drain bolt, it has A 12 mm head.To pull the cover off you must remove the 4 bolts around the cover and one bolt in the middle of the cover with a 10 mm head. chaincase holds 250 cc gear oil. Dont loose the washer on the idler gear shaft when you pull the cover.