Schocker65
New member
Just getting around to putting in the new weights/rollers, things going real smooth until the last weight. On this one, I take the bolt and nut off and the bushing won't come out. The others slid out easily.
I have hit it pretty hard with a dead blow hammer via a similar diameter socket. It's really stuck. Won't go either direction.
Trying to save the washers, so reluctant to use heat. Any other ideas?
I have hit it pretty hard with a dead blow hammer via a similar diameter socket. It's really stuck. Won't go either direction.
Trying to save the washers, so reluctant to use heat. Any other ideas?