sxr700/xc

ill go against the flow here and say the xc will be the winner, espically in a short race. those genII 600 twins were fast 600's! 115.8 hp @ 7900 rpm's w/ 77 lbs/torque and lighter weight too! they were also low and the chassis had low rolling resistance, so good top end for a twin. i'd hate to say it, but i think my 03 pro x 700 and attak would be a close run to 60mph.
 
Last edited:
I think if all the mods were done to the sxr (head gasket, geared down, silencer drilled out, and clutched and jetted) I think it wouldn't be close at all.
 
Been der dun dat. If the 600 is a powervalve motor your gonna need pipes. Done that race a lot of times. Them powervalve 600,s really fly. You might get him on a very long top end run without pipes.
 
crago you know what i should put the needles at in my carbs on my sled
hauck told me to put a 152 and two 150's for mains and leave pilots at 45
i am not sure where to put the needles
 
I was thinking about it, but they want $500 to port it and they said it's only worth about 5 HP. $100 per HP......I'll pass. Next year I might buy some twin pipes for it. :dunno: I'm going to ride it this year with the 144", clutch it, and gear it in the 2.0 range and see how I like it before I invest in more HP. ;)!
 
shortstop20 said:
I was thinking about it, but they want $500 to port it and they said it's only worth about 5 HP. $100 per HP......I'll pass. Next year I might buy some twin pipes for it. :dunno: I'm going to ride it this year with the 144", clutch it, and gear it in the 2.0 range and see how I like it before I invest in more HP. ;)!
did you do the 144" yet? me want pics! ;)!
 
jr_amsoil said:
crago you know what i should put the needles at in my carbs on my sled
hauck told me to put a 152 and two 150's for mains and leave pilots at 45
i am not sure where to put the needles

Stock position, but if U dont go to work, U wont need to worry about jetting. :o|
 
cacsrx1 said:
Stock position, but if U dont go to work, U wont need to worry about jetting. :o|


School just started now so i ant working much but after school for a couple hours but i took out a big student loan i'll be ok.
 
shortstop20 said:
Nope not yet. I was waiting for you to do yours so I could see pics. :rofl: Seriously though, I'm going to be ordering mine pretty soon. I'll be sure to post some pics.
are you going with tracks usa stuff? i will with the rail extensions, but im torn between the slp and tracks usa tunnel extension. i wish there were some decent pics of each around. :o|
 


Back
Top