pablo11059
New member
hey guys new to forum, new to snomobiles,
got a 94 500 vmax with hole in piston from step brother, been sitting for 5 years.
i got new piston rings gaskets, put her back togeather, started on first pull idles and runs great. has dg exhaust and seems to be stock other than clutch mods ? i am going to assume they jetted the sled properly with exhaust, not sure though.
problem- has exhaust temp gauge at first both were dead on, shut sled down after break in and 2 days later started the sled. now they are about 150 degrees different checked temp with lazer therm. confirmed that they indeed are different. lower temp on the repaired cyl.
iam very mech. inclined with autos was tech. know nothing about sleds. or 2 stroke in general other than general ideas how they opearate.
was wondering if you all had any ideas as to where i should start ? is this a problem @ all or how to move forward. seems odd and i dont want to let it run for linger than a min if there would be a major catastrophy.
sorry about long post just wanted to give all info, any help appreciated
thanks
got a 94 500 vmax with hole in piston from step brother, been sitting for 5 years.
i got new piston rings gaskets, put her back togeather, started on first pull idles and runs great. has dg exhaust and seems to be stock other than clutch mods ? i am going to assume they jetted the sled properly with exhaust, not sure though.
problem- has exhaust temp gauge at first both were dead on, shut sled down after break in and 2 days later started the sled. now they are about 150 degrees different checked temp with lazer therm. confirmed that they indeed are different. lower temp on the repaired cyl.
iam very mech. inclined with autos was tech. know nothing about sleds. or 2 stroke in general other than general ideas how they opearate.
was wondering if you all had any ideas as to where i should start ? is this a problem @ all or how to move forward. seems odd and i dont want to let it run for linger than a min if there would be a major catastrophy.
sorry about long post just wanted to give all info, any help appreciated
thanks
Last edited: