Hatch
New member
Heres my Sno-X Viper Project I've been working on all winter. I took it out a couple weeks ago for the first time, and was very impressed with it. The ski stance was widened to 43". It has the accual race trailing arms that Yamaha used when they sno-x raced the Viper and radius rods that were made by Northern Lites. I was going to put Ohlins on, but decided to go with the float 2's which are lighter and I like the adjustability with the air pump. Since I couldnt get a hold of the rear skid from a race sled, I decided to go with an M-10 and made it into a 136". Really sucks up the bumps. There alot of custom made parts on this sled to get everything to work. It has a custom made Rak-Steering setup, because the front end sits up higher. Steering arms were custom made to work with the race arms. It has firecat handle bars & powermadd riser, which moves the rider forward like 4". Rides more like an Apex now. It has a custom made boss like seat. 8" Cat wheels in back with an offset axle, Custom machined to accept the cat bearing. Sx brackets Custom made to convert to the fox shocks. White C&A pro skis. Polished tunnel & Flow rites in the dash. The Front end components are about half the weight of the stock stuff. I figure close to 10lbs cut off the front end. Still working on some custom graphics with blown concepts to finish it off.
Here are some Pics...
Here are some Pics...