bender pipe and can question

[viperking]

if i install a bender single pipe and can on a 780 viper will i have to change the jetting at all?

 

[Netefrog]

if i install a bender single pipe and can on a 780 viper will i have to change the jetting at all?

I think any time you change the expansion chamber on a carbed 2-Stroke you'll have to change the jetting aswell, and the clutching too.

 

[Mtn-Track]

If not already, ceramic coat or heat wrap the set-up before you jet and clutch. I lost power with my Bender 4x4 and SLP can at first, then I had my manifold, pipe, and can ceramic coated at Jet-Hot. Got the power back plus a little. Shed a ton of weight off the nose as well. It did require re-jetting, but not enough impact to justify messing with the clutch again.

 

[Thumper1]

well if you are going from tripples to a single pipe, then you would be pig fat rich.

 

[viperking]

no, it had a stock pipe and can on it and im just switching to a bender single pipe and can, it's clutched for the stock exhaust

 

[viperking]

any more input? any information would be appreciated thanks

 

[Whammy]

Should be good to go,,,, enjoy your new sound waves..........