YAMMIEGOD3:16
Active member
JOSH YES 3:16 (yammie tony)mopar1rules said:tony, which maxx primary spring did you use on this setup? white?--60/135
mopar1rules
Active member
YAMMIEGOD3:16 said:JOSH YES 3:16 (yammie tony)
ok, hauck orange would be a very close match to use then too. i'm liking that spring w/these 8BU-00's in my srx....lol.
YAMMIEGOD3:16
Active member
TOLD YA !!!!!!! 3:16 (yammie tony)
Concept Carbon
New member
Tony what 50/40 did you use dalton? Have you tride a 48/38 with the weights and a green secondary
![](/styles/vip.gif)
bluemonster1
LIFE MEMBER ONLY ONCE!!!
finally!!!
got my 8bu-00 weights today Tony,will install in my spare clutch..but will have to wait awhile until more snow arrives....
![Thumbs Up ;)! ;)!](https://totallyamaha.net/images/smilies/div20.gif)
got my 8bu-00 weights today Tony,will install in my spare clutch..but will have to wait awhile until more snow arrives....
![Head Bang :o| :o|](https://totallyamaha.net/images/smilies/banghead.gif)
![Thumbs Up ;)! ;)!](https://totallyamaha.net/images/smilies/div20.gif)
YAMMIEGOD3:16
Active member
COOL MONSTER, PLEASE POST RESULTS. 3:16 (yammie tony)
bluemonster1 said:got my 8bu-00 weights today Tony,will install in my spare clutch..but will have to wait awhile until more snow arrives....![]()
![]()
stop typing so fast u make the snow melt lolllllllllllll
![Letitsnow :letitsnow :letitsnow](https://totallyamaha.net/images/smilies/letitsnow.gif)
007redline
New member
YAMMIEGOD3:16 said:8BU-10 WEIGHTS.
4.5 RIVET IN TIP
4.5 RIVET INNER
50-40 HELIX @ 80
GREEN SPRING. NOTE :. MIGHT UNDER REV, SWITCH TO STOCK RED SPRING.
NOTE: I USE MAXXIMUM PERFORMANCE SRX SPRINGS. HARD TO FIND NOW. POSSIBLY W-W-W WOULD BE FINE. MIGHT NEED TO FINE TUNE ENGAGEMENT TO ATLEAST 4500 WITH A SHIM. REAL NICE ALL AROUND CLUTCH SETUP THAT REALLY PULLS HARD MID RANGE. WHISH I HAD LONG STRETCH TO REALLY FLY. 3:16 (yammie tony)
Coincidence I have a 51/40 helix and 8BU10 Weights...I think not..
![Bump :bump: :bump:](https://totallyamaha.net/images/smilies/bump.gif)
what do these weights weight unloaded ???
Last edited:
YAMMIEGOD3:16
Active member
45.40 3:16 (yammie tony)
007redline
New member
tried er out...will be doing more testing tomorrow
Tried my 8BU-10's tonight
This is the first time trying 8BU-10'S
Suspension Set pretty soft
Really cold night
144 Trail Studs 1.7's 3/4 Ultramax Track
200 lb Rider...lol
50/42 Dalton Helix
New Yamaha Belt (just broke er in yesterday)
Brand New Buttons
4.5 g Middle & 4.5 g tip
Bender Orange spring with ingagement shim
Blk spring with Green dot on it... 80degree twist
Conditions: Not hard pack snow...abit loose... It was Night time didn't pay too much attention to speed just revs...Will test this alittle more tomorrow in the day on the trail... and see what kind of speed I can get on the lake...
Ingagement was 4,000 RPM's spun alot..going to sharpen studs..soon
Quickly went to 8500 RPM'S and stayed there..
Tried my 8BU-10's tonight
This is the first time trying 8BU-10'S
Suspension Set pretty soft
Really cold night
144 Trail Studs 1.7's 3/4 Ultramax Track
200 lb Rider...lol
50/42 Dalton Helix
New Yamaha Belt (just broke er in yesterday)
Brand New Buttons
4.5 g Middle & 4.5 g tip
Bender Orange spring with ingagement shim
Blk spring with Green dot on it... 80degree twist
Conditions: Not hard pack snow...abit loose... It was Night time didn't pay too much attention to speed just revs...Will test this alittle more tomorrow in the day on the trail... and see what kind of speed I can get on the lake...
Ingagement was 4,000 RPM's spun alot..going to sharpen studs..soon
Quickly went to 8500 RPM'S and stayed there..
Last edited:
mopar1rules
Active member
007redline said:Tried my 8BU-10's tonight
This is the first time trying 8BU-10'S
Suspension Set pretty soft
Really cold night
144 Trail Studs 1.7's 3/4 Ultramax Track
200 lb Rider...lol
50/42 Dalton Helix
New Yamaha Belt (just broke er in yesterday)
Brand New Buttons
4.5 g Middle & 4.5 g tip
Bender Orange spring with ingagement shim
Stock Blk spring with Pink dot on it... 80degree twist
Conditions: Not hard pack snow...abit loose... It was Night time didn't pay too much attention to speed just revs...Will test this alittle more tomorrow in the day on the trail... and see what kind of speed I can get on the lake...
Ingagement was 4,000 RPM's spun alot..going to sharpen studs..soon
Quickly went to 8500 RPM'S and stayed there..
are you sure its a PINK dot? the stock spring should be a RED dot. the pink spring is for apexs and is far too stiff for a srx application.
007redline
New member
hey
Maybe your right..I just saw a black spring...lol I'll have another look..It's whatever the stock spring is..
Just Checked Black Spring Green Dot What's that...lol
Maybe your right..I just saw a black spring...lol I'll have another look..It's whatever the stock spring is..
Just Checked Black Spring Green Dot What's that...lol
Last edited:
![](/styles/vip.gif)
bluemonster1
LIFE MEMBER ONLY ONCE!!!
I don't have the 8bu-10's,just got the 8bu-oo's the other day
My set up to begin with will be as follows::
8bu-oo weights
4.5 tip
.8 inner(if need be)
www or stock primary spring
51/43 Helix(all I have besides stock 47)
Green Spring at 80 wrap
when the snow stops here and gets colder next week..may make an attempt to try it out.
My set up to begin with will be as follows::
8bu-oo weights
4.5 tip
.8 inner(if need be)
www or stock primary spring
51/43 Helix(all I have besides stock 47)
Green Spring at 80 wrap
when the snow stops here and gets colder next week..may make an attempt to try it out.
YAMMIEGOD3:16
Active member
REDLINE, HOW SLED FEEL. LIKE I SAID, THEY HIT HARD MID AND TOP. 3:16 (yammie tony)
YAMMIEGOD3:16 said:REDLINE, HOW SLED FEEL. LIKE I SAID, THEY HIT HARD MID AND TOP. 3:16 (yammie tony)
have u ever try on radar ???
tony tony tony
![2strokes :2strokes: :2strokes:](https://totallyamaha.net/images/smilies/2strokes.gif)
Last edited:
007redline
New member
YAMMIEGOD3:16 said:REDLINE, HOW SLED FEEL. LIKE I SAID, THEY HIT HARD MID AND TOP. 3:16 (yammie tony)
yeah it pulls really hard...Seems to have long legs on the lake...Going to line up with a few of the local srx's and see how they do ... I'm thinking not well...lol Would like to play alittle more with the suspension and Get those studs looking sharp...lol
Last edited:
Spinner18
New member
redline, you lined up with any other srx's yet?
![](/styles/vip.gif)
bluemonster1
LIFE MEMBER ONLY ONCE!!!
ttt..redline..have you got test results yet for your setup......
mopar1rules
Active member
doug, you try them weights yet?
YAMMIEGOD3:16
Active member
ANY OF YOU GUYS THAT HAVE DECIDED NOT TO USE THE 8BU-10,s HERE AND WANT TO SELL, I NEED A SET. 3:16 (yammie tony)