YAMMIEGOD3:16
Active member
JOSH YES 3:16 (yammie tony)mopar1rules said:tony, which maxx primary spring did you use on this setup? white?--60/135
JOSH YES 3:16 (yammie tony)mopar1rules said:tony, which maxx primary spring did you use on this setup? white?--60/135
YAMMIEGOD3:16 said:JOSH YES 3:16 (yammie tony)
bluemonster1 said:got my 8bu-00 weights today Tony,will install in my spare clutch..but will have to wait awhile until more snow arrives....![]()
![]()
YAMMIEGOD3:16 said:8BU-10 WEIGHTS.
4.5 RIVET IN TIP
4.5 RIVET INNER
50-40 HELIX @ 80
GREEN SPRING. NOTE :. MIGHT UNDER REV, SWITCH TO STOCK RED SPRING.
NOTE: I USE MAXXIMUM PERFORMANCE SRX SPRINGS. HARD TO FIND NOW. POSSIBLY W-W-W WOULD BE FINE. MIGHT NEED TO FINE TUNE ENGAGEMENT TO ATLEAST 4500 WITH A SHIM. REAL NICE ALL AROUND CLUTCH SETUP THAT REALLY PULLS HARD MID RANGE. WHISH I HAD LONG STRETCH TO REALLY FLY. 3:16 (yammie tony)
007redline said:Tried my 8BU-10's tonight
This is the first time trying 8BU-10'S
Suspension Set pretty soft
Really cold night
144 Trail Studs 1.7's 3/4 Ultramax Track
200 lb Rider...lol
50/42 Dalton Helix
New Yamaha Belt (just broke er in yesterday)
Brand New Buttons
4.5 g Middle & 4.5 g tip
Bender Orange spring with ingagement shim
Stock Blk spring with Pink dot on it... 80degree twist
Conditions: Not hard pack snow...abit loose... It was Night time didn't pay too much attention to speed just revs...Will test this alittle more tomorrow in the day on the trail... and see what kind of speed I can get on the lake...
Ingagement was 4,000 RPM's spun alot..going to sharpen studs..soon
Quickly went to 8500 RPM'S and stayed there..
YAMMIEGOD3:16 said:REDLINE, HOW SLED FEEL. LIKE I SAID, THEY HIT HARD MID AND TOP. 3:16 (yammie tony)
YAMMIEGOD3:16 said:REDLINE, HOW SLED FEEL. LIKE I SAID, THEY HIT HARD MID AND TOP. 3:16 (yammie tony)