03 Viper

MrSled

MrSled

Site Admin/CEO
Staff member
Joined
Apr 25, 2003
Messages
9,927
Age
55
Location
Weston WI
Website
www.totallyamaha.com
Here is a crashed 03 Viper that I am rebuilding, nothing fancy really other then some bling and a 128 Mono, extension, custom cooler and extension.
 

Attachments

  • IMG (2).JPG
    IMG (2).JPG
    47.3 KB · Views: 293
  • IMG (3).JPG
    IMG (3).JPG
    47.8 KB · Views: 266
  • IMG (7).JPG
    IMG (7).JPG
    49.2 KB · Views: 278
  • IMG (16).JPG
    IMG (16).JPG
    54.4 KB · Views: 283
Here she is torn down in several stages. With the final chassis completely stripped and cleaned.
 

Attachments

  • IMG_1225.JPG
    IMG_1225.JPG
    68.3 KB · Views: 304
  • IMG_1224.JPG
    IMG_1224.JPG
    67.3 KB · Views: 278
  • IMG_1223.JPG
    IMG_1223.JPG
    73.8 KB · Views: 302
  • IMG_1221.JPG
    IMG_1221.JPG
    79.3 KB · Views: 260
  • IMG_1218.JPG
    IMG_1218.JPG
    70.4 KB · Views: 313
  • IMG_1217.JPG
    IMG_1217.JPG
    72.6 KB · Views: 284
Finally getting sometime to work on this project again. I spent the past few weekends installing a skid in an Apex XTX and adding power steering to a Venture EPS.

Working on the running boards and installing the Mono 128 Brackets.
 

Attachments

  • IMG_1652.JPG
    IMG_1652.JPG
    53.1 KB · Views: 272
  • IMG_1651.JPG
    IMG_1651.JPG
    41.8 KB · Views: 269
  • IMG_1650.JPG
    IMG_1650.JPG
    54 KB · Views: 250
I was going to mention doing my board mod but I see you already installed some covers.
I have some pipes and head if your going to go piped?
 
BETHEVIPER said:
I was going to mention doing my board mod but I see you already installed some covers.
I have some pipes and head if your going to go piped?
Click to expand...


Not sure if I want to go that route or not... might want to leave her stock. Not sure if I want the headache of pipes. I was hoping to build the Viper the way I wanted the SX-R to be when it was released with the Red Head motor and wanted a single piped power valved motor.
 
Finally put a little more time into my Viper build. I added the tunnel extension for the 128" Mono, Retro fitted a Nytro bumper to the extension.
 

Attachments

  • ViperBuild (4).JPG
    ViperBuild (4).JPG
    128.6 KB · Views: 256
  • ViperBuild (5).JPG
    ViperBuild (5).JPG
    110.2 KB · Views: 274
  • ViperBuild (6).JPG
    ViperBuild (6).JPG
    127.5 KB · Views: 273
Then we put new bearing in the chain case, changed speedo side bearing and mounted up the track and jackshaft. I really wanted to get that mono skid in place to be sure everything was put in correctly....and it all worked out.

I also started to work on the rear plastic cover. Needed to notch it out for the tunnel extension. Working on a custom mounted rear exchanger and plumbing.

Next up will be to get the old girl on her skis ;)!
 

Attachments

  • ViperBuild (8).JPG
    ViperBuild (8).JPG
    140.5 KB · Views: 292
  • ViperBuild (10).JPG
    ViperBuild (10).JPG
    130.6 KB · Views: 216
  • ViperBuild (11).JPG
    ViperBuild (11).JPG
    135.8 KB · Views: 262
  • ViperBuild (12).JPG
    ViperBuild (12).JPG
    146.3 KB · Views: 284
Hey sled any chance you can measure the width of that bumper? Trying to see if it would fit the width of the hartman tunnel extension on my apex. Thanks love the build!
 
kinger said:
Hey sled any chance you can measure the width of that bumper? Trying to see if it would fit the width of the hartman tunnel extension on my apex. Thanks love the build!
Click to expand...


I will try and get you a dimension tonight... also you can post your dock stuff on this side as well.
 
You must log in or register to reply here.


Back
Top