Phazer Riser

[skidoostan]

my kid has a 2000 phazer a i put a riser on it ...now the throttle cable is too short ...they dont make a throttle extender for it ...anybody run into this yet ...this is only a single cable not a double

 

[A couple of bucks]

Hello Stan and welcome aboard. How much did you raise the bars?

 

[richierich]

You can try rerouting cable and gain some slack.If you look on the steering column there a metal hoop that cable runs thru.Take it out of there and route it the shortest distance to throttle block.Let us know what size riser is on there.

 

[skidoostan]

3 inch...i did some checking and a mountain lite cable is still too short...powermadd doesnt make an adapter for this set up ...looks like i need a custom made cable.if i had about 6 more inches it would be perfect

 

[snowdad4]

i have a friend that makes custom cables. if your interested i could give him a call and see if he can help you out.

 

[BETHEVIPER]

pm me how long it is and if you have a picture, I might have something that will work.
send picture to betheviper1@gmail.com

 

[skidoostan]

i will send it in the morning ...thanks

 

[Lasse]

I have a friend that makes custom throttle cables.
If you are interested I could give him a call and see if he can help you out

I would be intrested in a custom made throttle cable.
Please post some pictures on his custom made throttle cables !

 

[A couple of bucks]

3 inch

You'll definately need a custom cable w/ a 3 incher.

 

[skidoostan]

I found a guy down south that builds cables for ultralight aircraft and sent the cable to him ...keeping my fingers crossed

 

[A couple of bucks]

I found a guy down south that builds cables for ultralight aircraft and sent the cable to him ...keeping my fingers crossed

He's gonna add 3 inchs to the length of the cable you sent him....right. To make up the 3 inch riser. I'd hate to think that you left that out. Sounds like something I'd do though.

 

[skidoostan]

i had him add 5 inches ...the guy builds cables for small aircraft with sled motors

 

[A couple of bucks]

I seem to remember our venerable Vmax 4 engines were either FAA or EAA certified for ultralights.

 

[skidoostan]

Got the cable back and the guy did a great job ....cant tell it from a factory cable and it fits perfect ...feels like a whole different sled with risers

 

[Lasse]

Got the cable back and the guy did a great job...
cant tell it from a factory cable and it fits perfect...

Post some nice pictures of the custom made throttle cable.

 

[staggs65]

what was the cost for that cable if you dont mind sharing?

 

[skidoostan]

right around 68 bucks ...cable was done right