Totallyamaha is not responsible for any damages that these modifications may cause to your vehicle; any modifications are your responsibility if you choose to do so. We are providing information ONLY. Some of these modifications may VOID your warranty and that is your responsibility to look into. The Totallyamaha users have passed along most of the information found on this site. If you have any questions or concerns about anything on this site talk to your dealer before using any of the information. Totallyamaha will not be liable for any damages or personal injury from any modification performed from this site.
Tom gets a little irritated at me when I post things like this,,,,, lets hope this doesn't get put into the trash.... Let me tell you,, I've been writing these posts for a DECADE and hopefully i've helped a few people and saved people some money.. Posts about HEET,,,, Octane Boosters,,,,,, a HUNDRED posts about conventional lubricants and SYNTHETICS,,, and now a post about SEAFOAM..... here you go,,, boys and girls........Pale oil,, like the pale yellow or clear oil they use for REFRIGERATION UNITS... probably a 10 to 20 weight,, 10 weight being better and probably what's available...... Try and MAKE SURE that it's WAX FREE NAPTHENIC CRUDE OIL BASE STOCK,,, if you can.... .....Go to HOME DEPOT and get yourself a gallon of NAPHTHA and then go to the auto parts store and get a couple bottles of ISO HEET ( isopropyl Alcohol ).... Go OUTSIDE when you are going to mix this stuff together and keep the temperatures PRETTY CONSISTENT.. That means IF YOU BUY A GALLON OF NAPHTHA from home depot,, let it sit outside for a few hours to reach AMBIENT TEMPERATURE..... it is IMPORTANT that you keep the temperatures consistent with the AMBIENT AIR TEMPERATURE because of the ISOPROPYL ALCOHOL... ISOPROPYL,, Or "IPA" as it's called in the "business" is HYDROSCOPIC..... So is NAPHTHA....... Here's the formula... Pale oil = 50% NAPHTHA = 35% and 15% IPA.........keep it TIGHTLY SEALED after you mix it together.... IT CANNOT GET CONTAMINATED BY THE AMBIENT AIR... ALSO,,,,,, METAL CAN... NO PLASTIC BOTTLES or you'll be WEARING IT.... GOOD LUCK !!!!
Tom gets a little irritated at me when I post things like this,,,,, lets hope this doesn't get put into the trash.... Let me tell you,, I've been writing these posts for a DECADE and hopefully i've helped a few people and saved people some money.. Posts about HEET,,,, Octane Boosters,,,,,, a HUNDRED posts about conventional lubricants and SYNTHETICS,,, and now a post about SEAFOAM..... here you go,,, boys and girls........Pale oil,, like the pale yellow or clear oil they use for REFRIGERATION UNITS... probably a 10 to 20 weight,, 10 weight being better and probably what's available...... Try and MAKE SURE that it's WAX FREE NAPTHENIC CRUDE OIL BASE STOCK,,, if you can.... .....Go to HOME DEPOT and get yourself a gallon of NAPHTHA and then go to the auto parts store and get a couple bottles of ISO HEET ( isopropyl Alcohol ).... Go OUTSIDE when you are going to mix this stuff together and keep the temperatures PRETTY CONSISTENT.. That means IF YOU BUY A GALLON OF NAPHTHA from home depot,, let it sit outside for a few hours to reach AMBIENT TEMPERATURE..... it is IMPORTANT that you keep the temperatures consistent with the AMBIENT AIR TEMPERATURE because of the ISOPROPYL ALCOHOL... ISOPROPYL,, Or "IPA" as it's called in the "business" is HYDROSCOPIC..... So is NAPHTHA....... Here's the formula... Pale oil = 50% NAPHTHA = 35% and 15% IPA.........keep it TIGHTLY SEALED after you mix it together.... IT CANNOT GET CONTAMINATED BY THE AMBIENT AIR... ALSO,,,,,, METAL CAN... NO PLASTIC BOTTLES or you'll be WEARING IT.... GOOD LUCK !!!!
Last edited by a moderator:
