SSR 440 oval clone (440x)

Yamaha Nutz

Yamaha Nutz

New member
Joined
Jul 14, 2008
Messages
1,028
Age
43
Location
southeast Wi
SSR 440 oval clone (440x) now w/race action video link

DSC01599.jpg

sled started out as a 87 indy trail add one 78 SSR hood and one very custom 79 mod srx 440 motor and set of Aaen pipes keep in on this the sled is coming along nice and should be done in a month or so we will start at the beginning with the pics

023-1.jpg
035-1.jpg
037-1.jpg
038-1.jpg


aaen pipes reworked to fit the sled
 
Last edited:

Cool Mike!!!!!!

I have to get up and see this one. If it turns out as good as your other builds it will be Killer.

opsled
 
opsled i finally found a use for that special Aaen srx motor i am around most weekends but things are pretty busy here in july just give a jingle before you want to stop up .........................it has been a while the Kalamazoo fuelie gpx is going to be ridden finally she is set up and will be ready for princeton to hopefully beat up on the delaughter sleds........................... more pics to come plus i will throw in a few of the other sleds all the racers go a frame up this spring

Nutz
 
75 gpx SS 440 oval racer all freshend up
075.jpg
077.jpg


the MUTT 2010 ovation phazer exciter combo doing well as it should
nbmutt045.jpg

the original 75 gpx 433 850 original miles never polished not new parts only thing redon was the hood
75gpx026.jpg


80 ss 440 superstock fan oval racer getting the finishing touches
stGermain2010025.jpg
 
hood for my 74 gpx 338 oval racer took a weekend worth of work to paint this hood and i was leaning tward the marbleizing with the ssr hood
parade066.jpg
gpx338011.jpg


the kalamazoo fuelie mod
th_gpx2km003.jpg
kalamazoo031.jpg
kalamazoo035.jpg


the trail rider EX 440's
cphazermutt080.jpg


the 76 SRX 440 retro clone with hand carved seat that i think looks pretty close to original
067.jpg
http://i191.photobucket.com/albums/z64/mpsalvage1/068.jpg[/IMG]
 
Well to keep you guys entertained while the project is coming along ..................should have the motor in and front suspension done tonight here are some more pics of the GPX 338 and the 78 srx
ru09_29.jpg
1155181490_agfc6-XL.jpg
024-2.jpg
023-2.jpg
022-2.jpg


433 oval racer
003-1.jpg
004-3.jpg


Enjoy
 
thanks for the comments guys..................... things are coming slow right now too much work at the DPW.............. but it is back on its feet again front suspension back in place and jackshaft in next step is to get the motor mounted up and center to center and offset set then we can start on the clutch guard just so you guys know (being a yamaha site) polaris center to center is 12'' I chose to go with the 10.56'' of the yamaha center to center and i will be running the phazer II belts 87X and if things don't work right with the clutching i will go back to the srx primary (which i know inside and out) and with a 70's polaris secondary and run the 89X belt (narrower) so here are some more pics

006-2.jpg
005-2.jpg
003-2.jpg
002-1.jpg

027-2.jpg
031-2.jpg
 
Motor is in and snugged down just a little bit of alignment needed yet plan is to ge the exhaust brakects made tonight and the exhaust and blasted and painted up more pics to come
 
You must log in or register to reply here.


Back
Top