03viperguy
Moderator
I would say so!! pics please 
what do you tow with?
- Thread starter dlange
- Start date
sleddineinar
VIP Member
I tow other brands with my Yamaha. 
SRX500kid
New member
a 07 ford F150 with the 5.4 Triton with 40,000 miles or so! with a 6ft bed
bluebullet
New member
jbsk731
New member
how do i post pics on here?
Upload pics to photobucket or any other free pic hosting site then copy the
snoprokidf6
Member
2003 Chevy Impala - 3.8 v6
just turned 113,000 miles. Pulls two sleds, never failed to get where i planned on goin haha. Stopping sometimes is and issue.
shanevanstrom
New member
jbsk731 said:
Wow. That will get ya to the trails fast. I sold my f150 and bought a 08 F250 diesel. My brother owns a performance shop, so we did some tweaking as well.
648hp 1377tq at 54lbs of boost.
Here's what I put together for longer haul highway trips. A "homemade" Mercury Marauder/P71 Police Interceptor. It started out as a family members 2000 Grand Marquis with only 30,000 miles on it.
Some changes:
-4.6 PI engine...intake/heads/cams ect
-high output alternator
-Steeda under drive pulleys
-P71 Police Interceptor ECU to elliminate speed limiter and give higher shift RPMs[5550]also further adjusted ignition timing ect with "Super chips" programmer
-new 4r75w trans with 2004 Marauder Torque Convertor + "J" mods
-forced lube tail shaft
-Marauder intake system
-larger Aviator throttle body
-throttle body spacer
-ported plenum
-4" aluminum driveshaft with safety hoop
-3.55 gears/posi
-Addco sway bars
-P71 springs [front + back]
-Bilstein shocks
-18" wheels with 245/55/18 BFG Comp TA tires
-dual exhaust with high flow mufflers + cats
-P-71 engine oil cooler
-window tint
-front + rear spoilers
-digital tach with shift light
-class III trailer hitch
-ect ect
Some changes:
-4.6 PI engine...intake/heads/cams ect
-high output alternator
-Steeda under drive pulleys
-P71 Police Interceptor ECU to elliminate speed limiter and give higher shift RPMs[5550]also further adjusted ignition timing ect with "Super chips" programmer
-new 4r75w trans with 2004 Marauder Torque Convertor + "J" mods
-forced lube tail shaft
-Marauder intake system
-larger Aviator throttle body
-throttle body spacer
-ported plenum
-4" aluminum driveshaft with safety hoop
-3.55 gears/posi
-Addco sway bars
-P71 springs [front + back]
-Bilstein shocks
-18" wheels with 245/55/18 BFG Comp TA tires
-dual exhaust with high flow mufflers + cats
-P-71 engine oil cooler
-window tint
-front + rear spoilers
-digital tach with shift light
-class III trailer hitch
-ect ect
Last edited:
supercharged111
Member
Sideshowbob, that name sounds vaguely familiar. I have a difficult time believing, with that many mods, that you aren't on CVN. I'm Crownvicman289 on there.
More on topic, I do all my sled "towing" with the 6.5' bed of my 1/2 ton GMC.
More on topic, I do all my sled "towing" with the 6.5' bed of my 1/2 ton GMC.
Last edited:
supercharged111 said:
blueblooded
Member
DODGE HEMI RAM........what trailer????
HndaTch627
New member
2001 Subaru Impreza RS
Need to do something about finding wider mirrors but the car tows like a champ!
Jeremy
Need to do something about finding wider mirrors but the car tows like a champ!
Jeremy
HndaTch627 said:
HndaTch627
New member
sideshowBob said:Prodrive P1's or Rota Tarmacs? Those are the Tarmacs and there's not a whole hell of a lot left on that car that was factory, she's nearly 11years old and popped the motor about 6 1/2 years ago now. I do miss the torque the 2.5 had when towing but I've got more than enough HP to move the sleds aroundHndaTch627 said:
Jeremy
HndaTch627 said:Prodrive P1's or Rota Tarmacs? Those are the Tarmacs and there's not a whole hell of a lot left on that car that was factory, she's nearly 11years old and popped the motor about 6 1/2 years ago now. I do miss the torque the 2.5 had when towing but I've got more than enough HP to move the sleds around
Jeremy
Not much left stock on mine either...I just had a new 2.5 engine installed last month at SSI Subaru in Traverse City Mi. Mine also has a Borla header, Ispeed ECU, high flow cat and stainless cat back exhaust just to name a few changes.
03viperguy
Moderator
Thank you for your service!!dgasper said: