taylzee
New member
super1c said:Here's that damn exhaust stud bolt. I going to take the jug off to try and get a better hold on it and go from their. Man this has been a thorn in my side so far. Chris
If you have access to a welder just weld a nut on the shank. The heat from the weld will break the threads loose in the jug. Old mechanics trick from many busted manifold studs on aluminum blocks. The cool part is the heat will break it loose. After you weld the nut on, you can probably spin it out by hand if you still have the welding gloves on.