I polished the tunnel on my white srx was wanting to do it last year.
bluemonster1
LIFE MEMBER ONLY ONCE!!!
not a thing..its cold out and I won't even go outside lately.Kinda waiting for Spring again as I am outside everyday working on my yard.Winters I am inside doing nothing a lot..starting to get boring.And when it gets cold out,I don't even think or care about sleding to tell you the truth.
picked up apex and et 410 parts. orderd more parts. paid some natives with fire water to do a snow dance.
Welded my manifold and went riding! 
roudyroy1
Active member
cleaned carbs, bled cooling system, alligned and tensioned tracks, plugs, greased every fitting. (every thing x2)
killerklown
Member
greased skid
bluemonster1
LIFE MEMBER ONLY ONCE!!!
last night removed rear shock on SXR and tightened up the spring,re tensioned track and aligned ski's.Took her out today and all rides well.
A couple of bucks
VIP Member
How'd that turn out for ya.Maim said:
kenstoy
New member
I have a o7 rs rage , it has 1340 mile, waiting for snow ...
jason knowlton
New member
Took my vents out of my hood and painted them silver yesterday lol
I gave it a good wash.
Nothing!!!!!!!!!!
SpartaSXr
Member
Sled Fix
Well big weekend for the sleds. NO SNOW again so I worked on my 99 Phazer project. Mr Viper ported jugs installed, replaced the butterfly carbs with XTC flat-slides, painted the Hauck pipe, installed extended oil cable and replaced throttle block. Sled would only give me 6 grand ? Beat head against wall for hour wondering WTF. Checked primary, secondary, carbs WTH ? Removed the top of the air box and wholla 7500 ! Drilled 1" hole in top of air-box and now its ready for snow. Dent in forehead still hurts.
Buddy's SRX broke a chain last year so into that I went, found the chain came around and snapped the jack-shaft clean off ! Hole in the case and top gear are all smoked. Parts available but not till next weekend will that SRX be ready. Little ice fishing Sunday, DAMN COLD out there but better than sitting and looking at the sleds.
Well big weekend for the sleds. NO SNOW again so I worked on my 99 Phazer project. Mr Viper ported jugs installed, replaced the butterfly carbs with XTC flat-slides, painted the Hauck pipe, installed extended oil cable and replaced throttle block. Sled would only give me 6 grand ? Beat head against wall for hour wondering WTF. Checked primary, secondary, carbs WTH ? Removed the top of the air box and wholla 7500 ! Drilled 1" hole in top of air-box and now its ready for snow. Dent in forehead still hurts.
Buddy's SRX broke a chain last year so into that I went, found the chain came around and snapped the jack-shaft clean off ! Hole in the case and top gear are all smoked. Parts available but not till next weekend will that SRX be ready. Little ice fishing Sunday, DAMN COLD out there but better than sitting and looking at the sleds.
bluemonster1
LIFE MEMBER ONLY ONCE!!!
needaSRX said:
WHAT?? SRX not running yet!!!! Come on Andy...get riding...
A couple of bucks said:
got 1.5' of snow and trails where open this weekend!
fixed taillight on dad's venture and installed rock's hot hands for the passenger. dropped apex at dealer for 1st service.
A couple of bucks
VIP Member
Double the FIRE WATER for 3 feet.Maim said:
95rxl650
Member
Not today, but just catchin up.
Bought it, drooled on it, waxed it. Then got busy.
Pulled the skid and serviced accordingly, new bearings front to back, cleaned carbs, serviced clutches, pulled checked and wrapped wiring harness, cut down the too long studs, shimmed the skis, new exhaust donuts, and of course new fluids.
Today it sits as a frozen fudgesicle. Time to go at it with a rubber mallet then off to the car wash. Also pick up a carbide to replace the one I tore off yesterday, fill tank, ride.
Bought it, drooled on it, waxed it. Then got busy.
Pulled the skid and serviced accordingly, new bearings front to back, cleaned carbs, serviced clutches, pulled checked and wrapped wiring harness, cut down the too long studs, shimmed the skis, new exhaust donuts, and of course new fluids.
Today it sits as a frozen fudgesicle. Time to go at it with a rubber mallet then off to the car wash. Also pick up a carbide to replace the one I tore off yesterday, fill tank, ride.
99srxracer
New member
Picked it up. blew up my Sxr 2 weeks ago that I put a 141 in so I now have an 02 viper with 3000 miles ripped her around a little I'm impressed so far
Rustman
New member
took out washers in the secondary, added weight to primary.
bluemonster1
LIFE MEMBER ONLY ONCE!!!
did absolutely nothin at all..