
bluemonster1
LIFE MEMBER ONLY ONCE!!!
actually I spotted that add about 15 minutes before ya*a*ma*head.Or almost the same time.Saw the add in Yamaha units actually..there you go.
thstorms said:for the $1150 I payed he took off the Ohlins!!!
http://www.totallyamaha.net/forums/showthread.php?t=64684
well your parts listed are ordered and there is 3 bearings on the clutch side the retail price on all of this is $840 dollars but my price is $575.00 parts are ordered and we be here in a week. pete amato.thstorms said:I need to pick everyones brain one more time....... I am trying to get small cheap maintenance problems solved while I'm at it. I have a final list, Please pick it appart and tell me any other Maintenance related stuff you would do to make sure the Motor at least is problem free!!!!
1-Piston
1-Piston ring set
2-Wrist pins
2-Clip sets (wrist pin)
2-Wrist pin bearings
2-Crank Bearings (clutch side)
1-Head gasket
1-Base gasket
1-Water pump seal
1-Water pump belt
1-Crank seal set
1-Motor mount (exaust side)
again PLEASE PLEASE PLEASE if anyone has a head!!! I can make mine work but its not pretty
yes travis is coming over tommorow to use my shop and clean his parts up in my parts washer and i can look his stuff over and get ready for the rebuild. this site is awesome.Mtn-Track said:Looks like he's a real dedicated guy...![]()
http://www.totallyamaha.net/forums/showthread.php?t=64107
And maybe the pin from the engine grenade?![]()
http://www.totallyamaha.net/forums/showthread.php?t=66464
Pete? What can I say but your AWESONE for doing this! Same for the other contributors!![]()
amatosrx said:well your parts listed are ordered and there is 3 bearings on the clutch side the retail price on all of this is $840 dollars but my price is $575.00 parts are ordered and we be here in a week. pete amato.
he is going to order all 3 on the clutch side and i do not need them it is fine just wanted to have it there to check with yours when we get it off the crank.thstorms said:I only see 2 bearings........
![]()
there is 1 on the flywheel side, could it be a kit with all 3!!! I hope!!!
amatosrx said:he is going to order all 3 on the clutch side and i do not need them it is fine just wanted to have it there to check with yours when we get it off the crank.
i will call the dealer and just double check with him on the bearings?thstorms said:Im confused..... in the pic I just sent there is only 2 bearings on the clutch side....
and Im coming up Friday between 2:00 and 3:00