orchie18
Member
raced 1000ft with gfs dad on his apex ran about a sled lenght behind him with a little clutching. Beat another srx for a joke and a well tuned xc700. was very impressed. Will i have to still run engagement shims with a blue hauck spring? and yes so far i love these weights Yammiegod
bluemonster1
LIFE MEMBER ONLY ONCE!!!
what are your rpm's at launch and wot..What kinds speeds are you seeing also..just curious.I have a new setup done tonight.Will test it out either tomorrow or early in the week.We are suppose to get some snow tommorrow..so won't be a good day to do a run..Not many places smooth out here..either bumpy to hell or snow covered..ned to run on almost ice conditions to see what she'll do.I have been over reving to 8600 and had to get that down..we'll see.
orchie18
Member
bluemonster1 said:
My clutch engages just shy of 4k rpm and hits around 8000-82 at wot. hits about 98-100mph in 1000ft on the dreamometer. tracton yesterday was mediocre at best but was pretty good considering it was +2 c . I seem to be hitting 8500 consistantly. mabe a little over but hard to tell. I was talking to a guy the other day who used to race these srxs and he was saying that the tachs are a few hundred rpms off ..any body else here that or was he just a critic. he seem to know his sh*t though. Knew all about the 8bus
mopar1rules
Active member
orchie18 said:
are you sure its a 50/30, or did you mean 50/40?
orchie18
Member
mopar1rules said:
My bad...50/38
mopar1rules
Active member
what brand?
orchie18
Member
mopar1rules said:
I will have to check...il get back to ya...got to many helixs on the go to remeber...
YAMMIEGOD3:16
Active member
50/38 CAM WORKS AWESOME. THATS WHAT I USE IN MY 02 LOADED 8BU-10,s. ORCHIE, HAUCK BLUE IS REAL CLOSE TO YAMAHA W-W-W. GET YOUR ENGAGEMENT UP TO ATLEAST 4500. HAUCK BLUE OR YAMAHA W-W-W WITH A SHIM OR TWO SHOULD BE TICKET. 3:16 (yammie tony)
orchie18
Member
YAMMIEGOD3:16 said:
Tried the blue hauck spring with a temporary shim i cowboyied up..and got my engagment to 4500..and wow she jumps to 8500 right out of the hole. Im getting next to no traction because its raining here and all our snow is melting but it felt strong. seemed to be over reving in the top end but will test again on a better day. if we get anymore. im happy now for a day or too. thanks for the advice. 8BUS all the way....I dont see any names on the helix my guess would be Dalton?...my hauck, bender and megapower all have there names on it so...what ever it is she works.
mopar1rules
Active member
orchie18 said:
can you post a pic of the helix? are the helix angles engraved on the side of one of the helix ramps? is the helix kinda like gold plated/anodized?
orchie18
Member
mopar1rules said:
the angle is engraved on the ramps side it seems to be quite shiny i wouldnt say its anodized or plated?
mopar1rules
Active member
orchie18 said:
sounds like a dalton. probably actually measures around 47/35
dalton cuts are weak.
orchie18
Member
mopar1rules said:
what ever it may be..it works good so far.
how are those 8bu-10 for backshifting vs the 89a-10
mopar1rules
Active member
modsrx said:
i noticed better backshift w/8bu-10 then 89a10.
orchie18
Member
my sled had 8dn 20s in it before i changed to 8bus, I dont find the back shifting as good but the gains are worth it i trail rode all day yesterday with no complaints, hammer the throttle at any speed and it pulls hard and *** sidways out of the turns.
mopar1rules said:
thnx mopar maybe try them next year
mopar1rules
Active member
modsrx said:
you'll like them. i love them so far. won't be selling them. i'll probably switch to 8bu-00 for next year w/the 780 kit.
ill buy some new one if i decide to try them ......but the season is almost over so it will be next year
bluemonster1
LIFE MEMBER ONLY ONCE!!!
do it now mod..do it now.you might not be around next season..you never know....I heard the end of the world new date is March 22/2011..better hurry up...judgement Day..