ive just about had it with this stupid thing... desperately need help

P1010104.jpg

here is a better picture of the pipe...
P1010106.jpg

here is a better picture of the piece im talking about that moves around and i don't think its supposed to...
 
Great Pic! Look at the picture for instructions. Yup those buttons are wore out!
 

Attachments

  • Ex pipe.jpg
    Ex pipe.jpg
    139.3 KB · Views: 19
Yes it will quiet this sled up quite a bit. It can be repacked with packing made for dirt bikes which is a fiberglass mat material, do a search at Rockmountainatv.com to get an Idea, or if you have a store that has offroad equipment/supplies for dirt bikes or ATV's they should carry it, think it aobut $20. I have seen people put actual fiberglass house insulation in dirtbike silencers but it doesn't last long.
 
well im not planing on keeping it after this season, so you think it would last the season if i used house insulation? i found the buttons i need there like 2 dollars a peice and i need 3 of them
 
just wrap it kinda tight and put aluminum foil on the outside to ease with install. heck it $10-12 a roll at Home Depot.
 
i was just wondering that because my dads a carpenter so we have rolls of it sitting around i think in the attic so it will be free might get it done in a second, do you think switching my warn out buttons will help with my top end? i looked at my secondary and the markings from where it slides are a little under half an inch from the end which i'm assuming is where it should be at top speed?
 
88 yamaha 570 said:
i pulled the end piece off the can and there was an insert inside it that i couldn't get out, so i just put it back together...
Click to expand...
pics please... as this will help with disassembley and re-assembly.
 
well i just put it back together, once the pipe piece comes off there's an insert that wont come out because there is welds on the can to hold the end piece that were sticking out to far so i left it alone, i got my secondary back on and tested it out, ran smoother but didn't help any, pulled my plugs off and this is what i got...
P1010114.jpg
 
You must log in or register to reply here.


Back
Top