SLP Triple Pipe Install Questions, Need Pics if You Have Them

Went back to verify what all is in this thing from last season. Right now I have 8DN-10 weights with no rivets, stock springs in both clutches, and an RX1 helix at 60 degrees. Carbs have 148.8 mains, 47.5 pilots, and I changed the fuel screws from 1.5 to 1.75 turns out today. Carbs were nice and clean inside. Going to button up the scant remaining details tomorrow and try and take it out Wednesday or Thursday when the streets will be white again. I need to see how these 8EK weights act sooner than later as well.
 
supercharged111 said:
Went back to verify what all is in this thing from last season. Right now I have 8DN-10 weights with no rivets, stock springs in both clutches, and an RX1 helix at 60 degrees. Carbs have 148.8 mains, 47.5 pilots, and I changed the fuel screws from 1.5 to 1.75 turns out today. Carbs were nice and clean inside. Going to button up the scant remaining details tomorrow and try and take it out Wednesday or Thursday when the streets will be white again. I need to see how these 8EK weights act sooner than later as well.
Click to expand...
Straight 60 degree?
 
You must log in or register to reply here.


Back
Top